A free 3D tablet repair simulator. Assemble a tablet in 6 parts: the logic board and cameras, charging port and speakers, battery, LCD panel and front glass (digitizer). Then power it on and run the self-test.
Yes. It runs in your browser with no download, account or payment.
The LCD shows the picture. The digitizer is the touch-sensitive front glass. On many tablets they are separate parts with separate connectors, so a cracked glass can be replaced without a new LCD.
A connected battery can short-circuit components while you plug in other connectors. Disconnect it first when you open a tablet, and connect it last when you close one.
๐ Educational simulation ยท Not affiliated with Cisco ยท MIT License ยท Build a desktop PC ยท Assemble a laptop ยท Disclaimer
For educational purposes only. This is a practice simulation for rehearsing the steps of a tablet repair lab. It simplifies real hardware and is not a substitute for the manufacturer's service manual, your instructor, or hands-on supervised practice. Tablet designs vary a lot, so always follow the repair guide for your model.
Not affiliated with, endorsed by, or sponsored by Cisco Systems, Inc. or the Cisco Networking Academy. "Cisco" is a trademark of Cisco Systems, Inc. All game text, art and code are original.
Hardware names in the game (e.g. "BenchTab 11") are fictional. When working on real tablets: switch the tablet off, disconnect the battery first, use plastic tools, protect the LCD from pressure, and never install a swollen battery.
Game code ยฉ 2026 Htet Myark Aung, released under the MIT License (see LICENSE). Provided "as is", without warranty of any kind. 3D rendering by three.js (MIT).